Hello,
I am attempting to automate a Pentair SuperFlo VST pump (342002) that is connected to a spa. The installation manual says that the pump has an RS-485 port, but it looks like the wrong number of pins. The Pentiar RS-485 communications cable (350122) that I ordered will not fit.
I believe that Pentairs RS-485 port has 7 pins, but this pump's port (pictured below) has 8. Any idea what cable is needed to connect that to an IntelliCenter?
I am attempting to automate a Pentair SuperFlo VST pump (342002) that is connected to a spa. The installation manual says that the pump has an RS-485 port, but it looks like the wrong number of pins. The Pentiar RS-485 communications cable (350122) that I ordered will not fit.
I believe that Pentairs RS-485 port has 7 pins, but this pump's port (pictured below) has 8. Any idea what cable is needed to connect that to an IntelliCenter?
I have the exact same pump and the exact same problem. In my case, I'd like to be able to automatically turn off power to the iChlor30 Chlorine generator when the pump is not running. Neither the pump nor the iChlor30 came with the cable. Mine is an 8-pin socket as well. Pentair tech support is no help at all.
ReplyDelete